• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>LINK BELT Bearing>2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings

  • 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings

LINK BELT PKEB22432H MODELS

Need a CAD or 3D Model?

What is PKEB22432H bearing cross reference？
Contact NowWhatsAppBe Our Agent

2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings

category

LINK BELT Bearing

LINK BELT PKEB22432H SPECIFICATIONS

  • We 36.9 kN Basic dynamic load rating C Provide Extensive 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings Selection 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter And Competitive Wholesale Pricing. Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. 0.06 kg Mass needle roller and cage assembly

  • LINK BELT

  • PKEB22432H

  • 45.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 2520VQ14A12-11AA20
  • 2 1/2
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

LINK BELT Bearing Details

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1.375 in
  • Buna-N
  • 2700
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2700
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 2520VQ14A12-11AA20
  • 2300
  • 3000
  • 18
  • 21
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.41
  • 2.77

LINK BELT PKEB22432H 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings Customers who bought this item also bought

Cross reference 2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings

No.BrandDdBNounSealsUNSPSCWeightInventory
PB22432HK93LINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter2.25 Inch | 57.15 MillimeterBearingFloating Labyrinth311715115.450.0
PEB22432HLINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter2.25 Inch | 57.15 MillimeterBearingFloating Labyrinth311715115.130.0
PKB22432HK54LINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter2.25 Inch | 57.15 MillimeterBearingFloating Labyrinth311715115.450.0
DSB22432H12LINK BELT - 2 Inch | 50.8 Millimeter - Bearing - 3117153318.240.0
PEB22432ELINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter2.25 Inch | 57.15 MillimeterBearingSpring Loaded Lip311715115.450.0
PEB22432FE7LINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter2.25 Inch | 57.15 MillimeterBearingTriple Lip Contact311715115.90.0
PKB22432FELINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter2.25 Inch | 57.15 MillimeterBearingSpring Loaded Lip311715115.90.0
CSEB22432H18W4LINK BELT3.833 Inch | 97.358 Millimeter2 Inch | 50.8 Millimeter - BearingLabyrinth311715352.270.0
DSB22432HLINK BELT - 2 Inch | 50.8 Millimeter - Bearing - 311715336.360.0
EFRB22432E7LINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter - BearingTriple Lip Contact311715016.350.0
EFRB22432HLINK BELT3.125 Inch | 79.38 Millimeter2 Inch | 50.8 Millimeter - BearingFloating Labyrinth311715016.3560.0

 

LINK BELT FC3Y219N Flange Block BearingsDisplacement Shaft End (cu in/revolution):45.0 LB; Shaft End Pressure [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Minor Diameter:2520VQ14A12-11AA20; Shaft Seal Type:2 1/2; Major Diameter [Min:Flange; Mounting Flange:N/A; Weight:Standard Pilot; Shaft End Flow @ RPM:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
LINK BELT FEB22431E Flange Block BearingsModel No.:45.0 LB; Shaft End Pressure [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Max. RPM [Max:2520VQ14A12-11AA20; Controlled Flow Rate:2 1/2; Integral Valve Configuration:Flange; Shaft End RPM [Max:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Port Type:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
LINK BELT CEU323 Cartridge Unit BearingsSpline Description:45.0 LB; Mounting Flange:Flange Mount; Shaft Dia.:Right Hand (CW); Max. RPM [Max:2520VQ14A12-11AA20; Manufacturer Part No.:2 1/2; Pilot Type:Flange; Displacement Shaft End (cu in/revolution):N/A; Pressure Port Size, Shaft End:Standard Pilot; Cover End RPM [Max:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
LINK BELT FC3U2M65N Flange Block BearingsModel No.:45.0 LB; Minor Diameter [Max:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Relief Valve Setting:2520VQ14A12-11AA20; Minor Diameter [Min:2 1/2; Port Size:Flange; Controlled Flow Rate:N/A; Shaft Seal Type:Standard Pilot; Seal Material:0.875 in; Weight:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block BearingsSpline Description:45.0 LB; Cover End Pressure [Max:Flange Mount; Max. RPM [Max:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQ14A12-11AA20; Minor Diameter [Min:2 1/2; Rotation:Flange; Port Size:N/A; Cover End RPM [Max:Standard Pilot; Mounting:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller BearingsMounting:45.0 LB; Weight:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Seal Material:2520VQ14A12-11AA20; Port Size:2 1/2; Shaft Seal Type:Flange; Displacement Shaft End (cu in/revolution):N/A; Relief Valve Setting:Standard Pilot; Pressure Port Size, Cover End:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
LINK BELT DSB22439H24 Take Up Unit BearingsControlled Flow Rate:45.0 LB; Port Orientation - Shaft End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Model No.:2520VQ14A12-11AA20; Mounting Flange:2 1/2; Port Orientation - Cover End:Flange; Weight:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Minor Diameter:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
LINK BELT KFXS212D Flange Block BearingsShaft Key:45.0 LB; Port Orientation - Cover End:Flange Mount; Relief Valve Setting:Right Hand (CW); Seal Material:2520VQ14A12-11AA20; Shaft End RPM [Max:2 1/2; Minor Diameter:Flange; Cover End Pressure [Max:N/A; Minor Diameter [Max:Standard Pilot; Shaft Type:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter LINK BELT MU5213TV Cylindrical Roller BearingsGPM @ 1,800 rpm, Cover End:45.0 LB; Minor Diameter [Min:Flange Mount; Cover End RPM [Max:Right Hand (CW); Rotation:2520VQ14A12-11AA20; Major Diameter [Max:2 1/2; Max. RPM [Max:Flange; Major Diameter [Min:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft Type:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;
0.984 Inch | 25 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.437 Inch | 36.5 Millimeter LINK BELT KLPSS2M25 Pillow Block BearingsGPM @ 1,800 rpm, Shaft End:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Mounting:Right Hand (CW); Spline Description:2520VQ14A12-11AA20; Minor Diameter [Max:2 1/2; Manufacturer Part No.:Flange; Pressure Port Size, Shaft End:N/A; Major Diameter [Max:Standard Pilot; Cover End RPM [Max:0.875 in; Weight:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11AA20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77;

 

P3U235N Link-Belt Pillow Blocks Ball Bearings - Rexnord

P3U235N Link-Belt 200 Series Standard Duty Pillow Block Ball Bearing 10413991 P3U235N 2 3/16 PILLOWBLK BALL BRG 662327121297

B440L Link-Belt Bearing Inserts (Unmounted Replacements

B440L Link-Belt B22400 Series Spherical Roller Bearing 10425347 B440L 2 1/2 INSERT ROLLER BRG 793699983784

Link-Belt & Rex Bearing Catalog

2 Link-Belt® Spherical Roller Bearing Units. 123. Features & Benefits ... Rex® Roller Bearings represent the continuation of 80 years of bearing technology and 

Link-Belt Spherical Roller Bearings - Bearings | Rexnord

Link-Belt bearings are the workhorse of the bearing industry. Link-Belt's rugged spherical roller bearings perform with outstanding misalignment capabilities, 

Bearings: Ball, Cylindrical, Filament, Sleeve, and Roller

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

 

2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKEB22432H Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

LINK BELT PKEB22432H Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

LINK BELT Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed LINK BELT PKEB22432H Also Viewed

  • 2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block Bearings
  • LINK BELT DSB22439H24 Take Up Unit Bearings
  • LINK BELT KFXS212D Flange Block Bearings
  • LINK BELT FC3U2M65N Flange Block Bearings
  • 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2026 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us