• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>DODGE Bearing>1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings

  • 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter  DODGE P2B-SCU-104S-HT  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter  DODGE P2B-SCU-104S-HT  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter  DODGE P2B-SCU-104S-HT  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter  DODGE P2B-SCU-104S-HT  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter  DODGE P2B-SCU-104S-HT  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter  DODGE P2B-SCU-104S-HT  Pillow Block Bearings

DODGE P2B-SCU-104S-HT MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings

category

DODGE Bearing

DODGE P2B-SCU-104S-HT SPECIFICATIONS

  • Question1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. ? Find 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter what you need faster by entering your DODGE Bearing information .

  • DODGE
  • P2B-SCU-104S-HT

  • 45.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 2520VQ21A11-11DD20
  • 2 1/2
  • Flange
  • N/A
  • Standard Pilot
Download DODGE P2B-SCU-104S-HT Spec Sheet
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

DODGE Dimensions

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1.375 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQ21A11-11DD20
  • 3000
  • 3000
  • 16.5
  • 31.5
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.22
  • 4.12
1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings pdf

DODGE P2B-SCU-104S-HT 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings Compare similar products

Cross reference 1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings

No.BranddDBCSizeWidth
10404SIGMA20 mm72 mm19 mm19 mm20x72x1919
10405SIGMA25 mm80 mm21 mm21 mm25x80x2121
10406SIGMA30 mm90 mm23 mm23 mm30x90x2323
10407SIGMA35 mm100 mm25 mm25 mm35x100x2525
10408SIGMA40 mm110 mm27 mm27 mm40x110x2727
10409SIGMA45 mm120 mm29 mm29 mm45x120x2929
10410SIGMA50 mm130 mm31 mm31 mm50x130x3131
10411SIGMA55 mm140 mm33 mm33 mm55x140x3333
10412SIGMA60 mm150 mm35 mm35 mm60x150x3535
10413SIGMA65 mm160 mm37 mm37 mm65x160x3737
10414SIGMA70 mm180 mm42 mm42 mm70x180x4242

 

3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300LE Pillow Block BearingsMounting:45.0 LB; Max. RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Pilot Type:2520VQ21A11-11DD20; Rotation:2 1/2; Pressure Port Size, Shaft End:Flange; Major Diameter [Min:N/A; Major Diameter [Max:Standard Pilot; Shaft End RPM [Max:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE SP2B-IP-400RE Pillow Block BearingsMinor Diameter:45.0 LB; Integral Valve Configuration:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Cover End RPM [Max:2520VQ21A11-11DD20; Displacement Shaft End (cu in/revolution):2 1/2; Cover End Pressure [Max:Flange; Spline Description:N/A; Port Size:Standard Pilot; Shaft End Pressure [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
DODGE FB-DL-012 Flange Block BearingsCover End RPM [Max:45.0 LB; Seal Material:Flange Mount; Minor Diameter:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQ21A11-11DD20; Pilot Type:2 1/2; Shaft Key:Flange; Port Orientation - Cover End:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Spline Description:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
1.438 Inch | 36.525 Millimeter x 2.547 Inch | 64.694 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-K-107R Pillow Block BearingsShaft End Flow @ RPM:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Size:Right Hand (CW); Shaft Type:2520VQ21A11-11DD20; Pilot Type:2 1/2; Port Orientation - Cover End:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Major Diameter [Min:Standard Pilot; Shaft End Pressure [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
DODGE FC-SCM-208 Flange Block BearingsPort Type:45.0 LB; Shaft Dia.:Flange Mount; Pilot Type:Right Hand (CW); Minor Diameter:2520VQ21A11-11DD20; Cover End RPM [Max:2 1/2; Relief Valve Setting:Flange; Shaft Seal Type:N/A; Mounting:Standard Pilot; Integral Valve Configuration:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
DODGE INS-S2-111R Insert Bearings Spherical ODShaft Key:45.0 LB; Cover End Pressure [Max:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft End Flow @ RPM:2520VQ21A11-11DD20; Manufacturer Part No.:2 1/2; Displacement Cover End (cu in/revolution):Flange; Port Size:N/A; Integral Valve Configuration:Standard Pilot; Max. RPM [Max:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
DODGE EFC-IP-108LE Flange Block BearingsSpline Description:45.0 LB; Mounting Flange:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Port Size:2520VQ21A11-11DD20; Major Diameter [Max:2 1/2; Max. RPM [Max:Flange; Cover End Flow @ RPM:N/A; Pilot Type:Standard Pilot; Shaft Type:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
DODGE FB-SC-104S-NL Flange Block BearingsShaft End RPM [Max:45.0 LB; Port Type:Flange Mount; Shaft Length:Right Hand (CW); Port Orientation - Cover End:2520VQ21A11-11DD20; Spline Description:2 1/2; Minor Diameter [Max:Flange; Controlled Flow Rate:N/A; Port Orientation - Shaft End:Standard Pilot; Weight:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
DODGE WSTU-SC-010 Take Up Unit BearingsGPM @ 1,800 rpm, Shaft End:45.0 LB; Pump Series:Flange Mount; Pilot Type:Right Hand (CW); Minor Diameter:2520VQ21A11-11DD20; Shaft End RPM [Max:2 1/2; Relief Valve Setting:Flange; Weight:N/A; Cover End Flow @ RPM:Standard Pilot; Spline Description:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block BearingsModel No.:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Major Diameter [Max:Right Hand (CW); Rotation:2520VQ21A11-11DD20; Manufacturer Part No.:2 1/2; Cover End Pressure [Max:Flange; Major Diameter [Min:N/A; Spline Description:Standard Pilot; Shaft Length:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;

 

Dodge - P2BE207R - Motion Industries

Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion 

Mounted Bearings

For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize 

Mounted bearings | ABB

Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, 

Dodge

Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems 

Mounted Ball Bearings

Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™ 

 

1.25 Inch | 31.75 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCU-104S-HT Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

DODGE P2B-SCU-104S-HT Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

DODGE Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed DODGE P2B-SCU-104S-HT Also Viewed

  • DODGE FB-DL-012 Flange Block Bearings
  • DODGE WSTU-SC-010 Take Up Unit Bearings
  • DODGE EFC-IP-108LE Flange Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block Bearings
  • DODGE FB-SC-104S-NL Flange Block Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2022 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us