• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>DODGE Bearing>1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings

  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings
  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings
  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings
  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings
  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings
  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings

DODGE P2B-SCUEZ-103-PCR MODELS

Need a CAD or 3D Model?

What is P2B-SCUEZ-103-PCR bearing cross reference？
Contact NowWhatsAppBe Our Agent

1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings

category

DODGE Bearing

DODGE P2B-SCUEZ-103-PCR SPECIFICATIONS

  • 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings Needs Analysis , Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE Bearing Manufacturing Service . Get Your Free.

  • DODGE

  • P2B-SCUEZ-103-PCR

  • 76.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 3525VQ38A21-11AA20-LH
  • 3
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

DODGE Dimensions

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1.9375 in
  • Double
  • 7.4
  • 2400
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2400
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm
  • 3525VQ38A21-11AA20-LH
  • 3000
  • 3000
  • 31.5
  • 57
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 4.1

DODGE P2B-SCUEZ-103-PCR 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings Compare similar products

Cross reference 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings

No.BrandTdHRBEGC
YSPAG 206-103SKF - 30.162 mm - - - - - 18 mm
20TP103Timken34,925 mm50,8 mm141,3 mm - - 61,9 mm - -
20TPS103Timken - 50,8 mm141,3 mm190,5 mm - 85,7 mm - 46,038 mm
5103Ruville - - - - - - - -
1103KLTimken - 30,1625 mm - - 36,51 mm - 18,26 mm21,8 kN
1103KL3Timken - 31.75 mm - - 36,51 mm - 18,26 mm21,8 kN
1103KLBTimken - 30,1625 mm - - 36,51 mm - 18,26 mm21,8 kN
1103KLLTimken - 30,1625 mm - - 36,51 mm - 18,26 mm21,8 kN
1103KLL3Timken - 31.75 mm - - 36,51 mm - 18,26 mm21,8 kN
1103KLLBTimken - 30,1625 mm - - 36,51 mm - 18,26 mm21,8 kN
1103KLLB3Timken - 31.75 mm - - 36,51 mm - 18,26 mm21,8 kN

 

DODGE FB-SC-104S-NL Flange Block BearingsWeight:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Max. RPM [Max:Left Hand (CCW); Controlled Flow Rate:3525VQ38A21-11AA20-LH; Shaft End Flow @ RPM:3; Shaft End Pressure [Max:Flange; Manufacturer Part No.:N/A; Cover End Flow @ RPM:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Port Size:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
DODGE WSTU-SC-010 Take Up Unit BearingsGPM @ 1,800 rpm, Shaft End:76.0 LB; Integral Valve Configuration:Flange Mount; Shaft Dia.:Left Hand (CCW); Weight:3525VQ38A21-11AA20-LH; Pump Series:3; Shaft End Pressure [Max:Flange; Minor Diameter [Min:N/A; Controlled Flow Rate:Standard Pilot; Relief Valve Setting:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300LE Pillow Block BearingsCover End Pressure [Max:76.0 LB; Shaft Length:Flange Mount; Mounting Flange:Left Hand (CCW); Shaft Dia.:3525VQ38A21-11AA20-LH; Controlled Flow Rate:3; GPM @ 1,800 rpm, Cover End:Flange; Pressure Port Size, Cover End:N/A; Manufacturer Part No.:Standard Pilot; Pump Series:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
DODGE INS-S2-111R Insert Bearings Spherical ODShaft End Flow @ RPM:76.0 LB; Minor Diameter:Flange Mount; Shaft Length:Left Hand (CCW); Seal Material:3525VQ38A21-11AA20-LH; Minor Diameter [Max:3; Spline Description:Flange; Shaft Key:N/A; Mounting Flange:Standard Pilot; Manufacturer Part No.:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block BearingsMounting Flange:76.0 LB; Pilot Type:Flange Mount; Pump Series:Left Hand (CCW); Shaft Key:3525VQ38A21-11AA20-LH; Cover End RPM [Max:3; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Min:N/A; Port Type:Standard Pilot; Port Orientation - Cover End:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
1.438 Inch | 36.525 Millimeter x 2.547 Inch | 64.694 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-K-107R Pillow Block BearingsMax. RPM [Max:76.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ38A21-11AA20-LH; Pressure Port Size, Cover End:3; Minor Diameter [Min:Flange; Shaft End Flow @ RPM:N/A; Pilot Type:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Port Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
DODGE FB-DL-012 Flange Block BearingsManufacturer Part No.:76.0 LB; Mounting Flange:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft Type:3525VQ38A21-11AA20-LH; Shaft Key:3; Minor Diameter:Flange; Max. RPM [Max:N/A; Model No.:Standard Pilot; Minor Diameter [Min:1.25 in; Rotation:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
DODGE FC-SCM-208 Flange Block BearingsMinor Diameter:76.0 LB; Port Size:Flange Mount; Relief Valve Setting:Left Hand (CCW); Max. RPM [Max:3525VQ38A21-11AA20-LH; Manufacturer Part No.:3; Controlled Flow Rate:Flange; Shaft Type:N/A; Shaft End RPM [Max:Standard Pilot; Cover End RPM [Max:1.25 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE SP2B-IP-400RE Pillow Block BearingsCover End Pressure [Max:76.0 LB; Pilot Type:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Spline Description:3525VQ38A21-11AA20-LH; Major Diameter [Min:3; Major Diameter [Max:Flange; Port Orientation - Shaft End:N/A; Port Size:Standard Pilot; Minor Diameter [Max:1.25 in; Model No.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
DODGE EFC-IP-108LE Flange Block BearingsShaft Seal Type:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Seal Material:Left Hand (CCW); Rotation:3525VQ38A21-11AA20-LH; Cover End RPM [Max:3; Relief Valve Setting:Flange; Pilot Type:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Key:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;

 

Mounted Bearings

For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize 

Dodge - P2BE207R - Motion Industries

Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion 

Mounted Ball Bearings

Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™ 

Dodge

Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems 

Mounted bearings | ABB

Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, 

 

1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

DODGE P2B-SCUEZ-103-PCR Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

DODGE Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed DODGE P2B-SCUEZ-103-PCR Also Viewed

  • DODGE FB-DL-012 Flange Block Bearings
  • DODGE WSTU-SC-010 Take Up Unit Bearings
  • DODGE EFC-IP-108LE Flange Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block Bearings
  • DODGE FB-SC-104S-NL Flange Block Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us