• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>DODGE Bearing>2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings

  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter  DODGE P4B-E-211R  Pillow Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter  DODGE P4B-E-211R  Pillow Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter  DODGE P4B-E-211R  Pillow Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter  DODGE P4B-E-211R  Pillow Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter  DODGE P4B-E-211R  Pillow Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter  DODGE P4B-E-211R  Pillow Block Bearings

DODGE P4B-E-211R MODELS

Need a CAD or 3D Model?

What is P4B-E-211R bearing interchange?
Contact NowWhatsAppBe Our Agent

2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings

category

DODGE Bearing

DODGE P4B-E-211R SPECIFICATIONS

  • 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings manufacturer and Split Cylindrical Re Bearing Type global supplier of reliable Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. ball and roller ... 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings Industries Products Manufacturing & Engineering and Agricultural Bearings designed to meet the unique 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter requirements of our targeted industries.

  • DODGE
  • P4B-E-211R

  • 45.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 2520VQ14A14-11CC20
  • 2 1/2
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

DODGE Dimensions

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2700
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2700
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 2520VQ14A14-11CC20
  • 2000
  • 3000
  • 21
  • 21
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.8
  • 2.77

DODGE P4B-E-211R 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings Compare similar products

Cross reference 2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings

No.BrandbdDCC0FwSizeWidth
YSP 213-211 SB-2FSKF - 68.262 mm120 mm27 mm - - 120x68.262x52.552,5
15BM2110KOYO - 1521 mm7,7 kN11,8 kN15 mm15x21x1010
15BM2112KOYO - 1521 mm9,7 kN15,9 kN15 mm15x21x1212
15BM2116KOYO - 1521 mm13,4 kN24,2 kN15 mm15x21x1616
15BTM2110JAKOYO - 1521 mm5,25 kN6,25 kN15 mm15x21x1010
15BTM2112-1KOYO - 1521 mm7 kN8,8 kN15 mm15x21x1212
15BTM2116KOYO - 1521 mm9,8 kN13,6 kN15 mm15x21x1616
15MKM2112KOYO9,3 mm1521 mm7 kN8,8 kN15 mm15x21x1212
15MKM2116KOYO13,3 mm1521 mm9,8 kN13,6 kN15 mm15x21x1616
15MM2112KOYO9,6 mm1521 mm9,7 kN15,9 kN15 mm15x21x1212
15MM2116KOYO13,7 mm1521 mm13,4 kN24,2 kN15 mm15x21x1616

 

2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block BearingsPort Type:45.0 LB; Pump Series:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ14A14-11CC20; Model No.:2 1/2; Shaft End Pressure [Max:Flange; Minor Diameter [Min:N/A; Minor Diameter [Max:Standard Pilot; Weight:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE SP2B-IP-400RE Pillow Block BearingsShaft Length:45.0 LB; Cover End RPM [Max:Flange Mount; Minor Diameter [Max:Right Hand (CW); Port Type:2520VQ14A14-11CC20; GPM @ 1,800 rpm, Shaft End:2 1/2; Integral Valve Configuration:Flange; Major Diameter [Max:N/A; Port Orientation - Shaft End:Standard Pilot; Spline Description:0.875 in; Seal Material:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300LE Pillow Block BearingsShaft End Pressure [Max:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter:Right Hand (CW); Shaft Key:2520VQ14A14-11CC20; Rotation:2 1/2; Pump Series:Flange; Minor Diameter [Min:N/A; Cover End Flow @ RPM:Standard Pilot; Port Orientation - Shaft End:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
DODGE FB-DL-012 Flange Block BearingsShaft End Pressure [Max:45.0 LB; Shaft Length:Flange Mount; Minor Diameter [Min:Right Hand (CW); Controlled Flow Rate:2520VQ14A14-11CC20; Minor Diameter [Max:2 1/2; Pump Series:Flange; Relief Valve Setting:N/A; Shaft Seal Type:Standard Pilot; Pressure Port Size, Cover End:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
DODGE FC-SCM-208 Flange Block BearingsIntegral Valve Configuration:45.0 LB; Pilot Type:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft Length:2520VQ14A14-11CC20; Shaft Dia.:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Minor Diameter:N/A; Model No.:Standard Pilot; Shaft Type:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
DODGE INS-S2-111R Insert Bearings Spherical ODSpline Description:45.0 LB; Pilot Type:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft End Flow @ RPM:2520VQ14A14-11CC20; Pressure Port Size, Shaft End:2 1/2; Controlled Flow Rate:Flange; Mounting Flange:N/A; Rotation:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
1.438 Inch | 36.525 Millimeter x 2.547 Inch | 64.694 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-K-107R Pillow Block BearingsManufacturer Part No.:45.0 LB; Controlled Flow Rate:Flange Mount; Pump Series:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQ14A14-11CC20; Max. RPM [Max:2 1/2; Shaft End Pressure [Max:Flange; Port Orientation - Shaft End:N/A; Integral Valve Configuration:Standard Pilot; Mounting Flange:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
DODGE WSTU-SC-010 Take Up Unit BearingsMinor Diameter [Min:45.0 LB; Minor Diameter [Max:Flange Mount; Controlled Flow Rate:Right Hand (CW); Shaft Length:2520VQ14A14-11CC20; GPM @ 1,800 rpm, Shaft End:2 1/2; Rotation:Flange; Cover End RPM [Max:N/A; Cover End Pressure [Max:Standard Pilot; Manufacturer Part No.:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
DODGE FB-SC-104S-NL Flange Block BearingsPort Orientation - Cover End:45.0 LB; Port Size:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Port Type:2520VQ14A14-11CC20; Shaft Dia.:2 1/2; Minor Diameter:Flange; Cover End Pressure [Max:N/A; Mounting Flange:Standard Pilot; Minor Diameter [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;
DODGE EFC-IP-108LE Flange Block BearingsManufacturer Part No.:45.0 LB; Cover End Pressure [Max:Flange Mount; Spline Description:Right Hand (CW); Shaft End RPM [Max:2520VQ14A14-11CC20; Shaft End Pressure [Max:2 1/2; Rotation:Flange; Minor Diameter:N/A; Shaft Seal Type:Standard Pilot; Pressure Port Size, Cover End:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11CC20; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.77;

 

Dodge - P2BE207R - Motion Industries

Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion 

Mounted Ball Bearings

Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™ 

Mounted Bearings

For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize 

Mounted bearings | ABB

Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, 

Dodge

Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems 

 

2.688 Inch | 68.275 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P4B-E-211R Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

DODGE P4B-E-211R Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

DODGE Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed DODGE P4B-E-211R Also Viewed

  • DODGE FB-DL-012 Flange Block Bearings
  • DODGE WSTU-SC-010 Take Up Unit Bearings
  • DODGE EFC-IP-108LE Flange Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block Bearings
  • DODGE FB-SC-104S-NL Flange Block Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us