• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>DODGE Bearing>9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings

  • 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings
  • 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings
  • 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings
  • 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings
  • 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings
  • 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings

DODGE P4B056-USAF-915TT MODELS

Need a CAD or 3D Model?

What is P4B056-USAF-915TT bearing cross reference？
Contact NowWhatsAppBe Our Agent

9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings

category

DODGE Bearing

DODGE P4B056-USAF-915TT SPECIFICATIONS

  • Shop 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings huge online 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter discount DODGE Bearing inventory. DODGE Bearing and Import machinery parts your car 9210 lbf Ca90 - Dynamic Thrust Rating (90 million revolutions)7 needs with Free Shipping and Free Extended Warranty. Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd.

  • DODGE

  • P4B056-USAF-915TT

  • 75.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 3520V30A8-86AA22L
  • 3
  • Flange
  • 5/16 in
  • Standard Pilot
Download DODGE P4B056-USAF-915TT Spec Sheet
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

DODGE Dimensions

  • 1.375 in
  • Straight w/ Key
  • 3520V
  • 3.875 in
  • Buna-N
  • 1800
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 1800
  • 1800
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
  • 3520V30A8-86AA22L
  • 3000
  • 2500
  • 12
  • 45
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Code 61
  • 1 1/4 in Code 61
  • 1.7
  • 5.9
9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings pdf

DODGE P4B056-USAF-915TT 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings Compare similar products

Cross reference 9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings

No.BrandBdDCC0SizeWidthWeight
4056Ruville - - - - - - - -
VKHB 2056SKF - 45,00080,000 - - 45x80x2626,0000.56
AST090 10560AST - 105110 - - - - -
TL23056CAE4NSK106 mm280 mm420 mm1540 kN2950 kN280x420x10610650,5 Kg
TL23056CAKE4NSK106 mm280 mm420 mm1540 kN2950 kN280x420x10610650,5 Kg
VKBA 915SKF - - - - - - - -
5915Ruville - - - - - - - -
AST090 20560AST - 205210 - - - - -
ZB1.20.0568.200-2RPPNISB - 471 mm640 mm - - 471x640x5555 -
712056810INA25,85 mm30,6 mm40 mm - - 30.6x40x25.8525,85 -
6915Ruville - - - - - - - -

 

DODGE FC-SCM-208 Flange Block BearingsShaft Type:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Pump Series:Left Hand (CCW); Mounting Flange:3520V30A8-86AA22L; Port Size:3; Shaft Length:Flange; Mounting:5/16 in; Port Orientation - Cover End:Standard Pilot; Shaft End Pressure [Max:1.375 in; Minor Diameter:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
DODGE INS-S2-111R Insert Bearings Spherical ODShaft Dia.:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Port Type:3520V30A8-86AA22L; Cover End RPM [Max:3; Port Orientation - Shaft End:Flange; Mounting:5/16 in; Relief Valve Setting:Standard Pilot; Controlled Flow Rate:1.375 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE SP2B-IP-400RE Pillow Block BearingsRotation:75.0 LB; Port Size:Flange Mount; Shaft Dia.:Left Hand (CCW); Max. RPM [Max:3520V30A8-86AA22L; Major Diameter [Max:3; Pump Series:Flange; Controlled Flow Rate:5/16 in; Shaft End RPM [Max:Standard Pilot; Pilot Type:1.375 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300LE Pillow Block BearingsMounting:75.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter:Left Hand (CCW); Shaft Dia.:3520V30A8-86AA22L; Shaft End Flow @ RPM:3; Mounting Flange:Flange; Cover End RPM [Max:5/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Shaft Key:1.375 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block BearingsPort Orientation - Shaft End:75.0 LB; Model No.:Flange Mount; Relief Valve Setting:Left Hand (CCW); Shaft Length:3520V30A8-86AA22L; Seal Material:3; Shaft Type:Flange; Major Diameter [Min:5/16 in; Major Diameter [Max:Standard Pilot; Cover End Pressure [Max:1.375 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
1.438 Inch | 36.525 Millimeter x 2.547 Inch | 64.694 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-K-107R Pillow Block BearingsPump Series:75.0 LB; Mounting Flange:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Controlled Flow Rate:3520V30A8-86AA22L; Port Orientation - Cover End:3; Minor Diameter:Flange; Pilot Type:5/16 in; Cover End Flow @ RPM:Standard Pilot; Major Diameter [Max:1.375 in; Shaft Seal Type:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
DODGE EFC-IP-108LE Flange Block BearingsShaft End Flow @ RPM:75.0 LB; Shaft Type:Flange Mount; Seal Material:Left Hand (CCW); Pressure Port Size, Cover End:3520V30A8-86AA22L; Manufacturer Part No.:3; Port Orientation - Shaft End:Flange; Mounting:5/16 in; Relief Valve Setting:Standard Pilot; Shaft Key:1.375 in; Port Orientation - Cover End:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
DODGE FB-DL-012 Flange Block BearingsMounting Flange:75.0 LB; Cover End Pressure [Max:Flange Mount; Model No.:Left Hand (CCW); Pressure Port Size, Cover End:3520V30A8-86AA22L; Max. RPM [Max:3; Controlled Flow Rate:Flange; Pump Series:5/16 in; Spline Description:Standard Pilot; Shaft Seal Type:1.375 in; Pilot Type:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
DODGE FB-SC-104S-NL Flange Block BearingsCover End RPM [Max:75.0 LB; Controlled Flow Rate:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Port Type:3520V30A8-86AA22L; Major Diameter [Min:3; Spline Description:Flange; Weight:5/16 in; Shaft End Flow @ RPM:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.375 in; Port Orientation - Cover End:Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;
DODGE WSTU-SC-010 Take Up Unit BearingsMinor Diameter [Max:75.0 LB; Port Size:Flange Mount; Seal Material:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3520V30A8-86AA22L; Minor Diameter:3; Port Orientation - Cover End:Flange; Pump Series:5/16 in; Shaft Length:Standard Pilot; Max. RPM [Max:1.375 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:3520V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A8-86AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):5.9;

 

Mounted Bearings

For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize 

Mounted Ball Bearings

Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™ 

Mounted bearings | ABB

Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, 

Dodge - P2BE207R - Motion Industries

Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion 

Dodge

Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems 

 

9.938 Inch | 252.425 Millimeter x 13.656 Inch | 346.862 Millimeter x 9.875 Inch | 250.825 Millimeter DODGE P4B056-USAF-915TT Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

DODGE P4B056-USAF-915TT Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

DODGE Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed DODGE P4B056-USAF-915TT Also Viewed

  • DODGE FB-DL-012 Flange Block Bearings
  • DODGE WSTU-SC-010 Take Up Unit Bearings
  • DODGE EFC-IP-108LE Flange Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block Bearings
  • DODGE FB-SC-104S-NL Flange Block Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2022 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us