• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>FAG Bearing>200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings

  • 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings
  • 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings
  • 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings
  • 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings
  • 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings
  • 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings

FAG NJ2240-E-M1 MODELS

Need a CAD or 3D Model?

What is NJ2240-E-M1 bearing interchange？
Contact NowWhatsAppBe Our Agent

200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings

category

FAG Bearing

FAG NJ2240-E-M1 SPECIFICATIONS

  • FAG Bearing offers a 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings selection of Genuine FAG Bearing 200 mm x 360 mm x 98 mm at Wholesale Prices. We are a Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. B04144 Product Group 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings Certified Parts Retailer

  • FAG

  • NJ2240-E-M1

  • 75.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 3520VQ25A12-1AA20LH
  • 3
  • Flange
  • 5/16 in
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

NJ2240-E-M1 Specification details

  • 1.25 in
  • Straight w/ Key
  • 3520VQ
  • 2 1/2 in
  • Buna-N
  • 2500
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2500
  • 2500
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3520VQ25A12-1AA20LH
  • 2300
  • 3000
  • 18
  • 37.5
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Flange
  • 1 1/4 in Flange
  • 2.41
  • 4.98

FAG NJ2240-E-M1 FAG Bearing Code system

Cross reference 200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings

No.BrandDdHBCsNm
ZR3.25.2240.400-1SPPNISB2421 mm1944 mm147 mm - - - 48 mm18 mm
ZR3.32.2240.400-1SPPNISB2458 mm1908 mm181 mm - - - 40 mm18 mm
Z-522400.04.DRGLFAG870 mm340 mm - 280 mm272 mm - - -
Z-522401.04.DRGLFAG780 mm300 mm - 243 mm250 mm - - -
22240EMKW33SNR360,000 mm200,000 mm98,000 mm - - - - -
22240EMW33SNR360,000 mm200,000 mm98,000 mm - - - - -
TL22240CAE4NSK360 mm200 mm - 98 mm1300 kN - - -
TL22240CAKE4NSK360 mm200 mm - 98 mm1300 kN - - -
ZB1.50.2240.400-1SPPNISB2411 mm1984 mm109 mm - - - - 16 mm
SL182240INA360 mm200 mm - 98 mm - 9 mm / Axial displacement - 43,12 kg / Weight
22240ENACHI360 mm200 mm - 98 mm1810 kN - - -

 

FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball BearingsMounting Flange:75.0 LB; Port Type:Flange Mount; Shaft Type:Left Hand (CCW); Weight:3520VQ25A12-1AA20LH; Displacement Cover End (cu in/revolution):3; Cover End RPM [Max:Flange; Port Orientation - Cover End:5/16 in; Relief Valve Setting:Standard Pilot; Shaft Key:1.25 in; Cover End Pressure [Max:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG N206-E-M1 Cylindrical Roller BearingsWeight:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Dia.:Left Hand (CCW); Seal Material:3520VQ25A12-1AA20LH; Cover End RPM [Max:3; Cover End Pressure [Max:Flange; Controlled Flow Rate:5/16 in; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Minor Diameter [Min:1.25 in; Relief Valve Setting:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG NU1024-M1-C3 Cylindrical Roller BearingsShaft Key:75.0 LB; Relief Valve Setting:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Minor Diameter [Max:3520VQ25A12-1AA20LH; Max. RPM [Max:3; Rotation:Flange; Major Diameter [Min:5/16 in; Pressure Port Size, Cover End:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Integral Valve Configuration:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG NJ2318-E-TVP2-C3 Cylindrical Roller BearingsCover End Flow @ RPM:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Seal Material:Left Hand (CCW); Rotation:3520VQ25A12-1AA20LH; Shaft Key:3; Model No.:Flange; GPM @ 1,800 rpm, Cover End:5/16 in; Pilot Type:Standard Pilot; Relief Valve Setting:1.25 in; Minor Diameter:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG 6217-2RSR-NR Single Row Ball BearingsPilot Type:75.0 LB; Shaft Length:Flange Mount; Max. RPM [Max:Left Hand (CCW); Mounting:3520VQ25A12-1AA20LH; Port Orientation - Shaft End:3; GPM @ 1,800 rpm, Cover End:Flange; Spline Description:5/16 in; Shaft Seal Type:Standard Pilot; Rotation:1.25 in; Port Size:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG 23326-AS-M-T41A Spherical Roller BearingsMinor Diameter:75.0 LB; Shaft End Pressure [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Minor Diameter [Max:3520VQ25A12-1AA20LH; Minor Diameter [Min:3; Shaft Type:Flange; Cover End Flow @ RPM:5/16 in; Pressure Port Size, Shaft End:Standard Pilot; Shaft Length:1.25 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG QJ1040-MPA Angular Contact Ball BearingsPressure Port Size, Cover End:75.0 LB; Shaft Seal Type:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Relief Valve Setting:3520VQ25A12-1AA20LH; Cover End RPM [Max:3; Displacement Shaft End (cu in/revolution):Flange; Major Diameter [Min:5/16 in; Pump Series:Standard Pilot; Shaft Length:1.25 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG 6311-M-P5 Precision Ball BearingsPilot Type:75.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Displacement Cover End (cu in/revolution):3520VQ25A12-1AA20LH; Relief Valve Setting:3; Shaft End Pressure [Max:Flange; Port Size:5/16 in; Rotation:Standard Pilot; Port Orientation - Cover End:1.25 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
Timken hm926749 BearingGPM @ 1,800 rpm, Cover End:75.0 LB; Model No.:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Minor Diameter [Min:3520VQ25A12-1AA20LH; Relief Valve Setting:3; Displacement Cover End (cu in/revolution):Flange; Shaft Type:5/16 in; Mounting:Standard Pilot; Shaft Dia.:1.25 in; Rotation:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;
FAG 6217-C5 Single Row Ball BearingsIntegral Valve Configuration:75.0 LB; Pressure Port Size, Shaft End:Flange Mount; Port Size:Left Hand (CCW); Shaft Length:3520VQ25A12-1AA20LH; Minor Diameter [Min:3; Mounting Flange:Flange; Shaft End Pressure [Max:5/16 in; Max. RPM [Max:Standard Pilot; Port Orientation - Cover End:1.25 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:3520VQ; Shaft Length:2 1/2 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A12-1AA20LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):4.98;

 

FAG (Schaeffler) - Motion Industries

Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the 

Products / Services | Bearing ... - Schaeffler North America

FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing 

INA/FAG Industrial Bearings from National Precision Bearing

INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball

FAG Bearings | E.B. Atmus Co., Inc

FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany 

Deep groove ball bearing by FAG | Schaeffler Germany

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads

 

200 mm x 360 mm x 98 mm FAG NJ2240-E-M1 Cylindrical Roller Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

FAG NJ2240-E-M1 Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

FAG Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed FAG NJ2240-E-M1 Also Viewed

  • Timken hm926749 Bearing
  • FAG 23326-AS-M-T41A Spherical Roller Bearings
  • FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball Bearings
  • FAG 6311-M-P5 Precision Ball Bearings
  • FAG 6217-C5 Single Row Ball Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us