• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>LINK BELT Bearing>1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings

  • 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter  LINK BELT KPS2E20D40A  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter  LINK BELT KPS2E20D40A  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter  LINK BELT KPS2E20D40A  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter  LINK BELT KPS2E20D40A  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter  LINK BELT KPS2E20D40A  Pillow Block Bearings
  • 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter  LINK BELT KPS2E20D40A  Pillow Block Bearings

LINK BELT KPS2E20D40A MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings

category

LINK BELT Bearing

LINK BELT KPS2E20D40A SPECIFICATIONS

  • 100% Authentic. 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings Highest Quality. Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. 22220e/c5-qbl SKU: Certified 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter Supplier.

  • LINK BELT
  • KPS2E20D40A

  • 101.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 4525VQ60A21-11DD20
  • 3.5
  • Flange
  • N/A
  • Standard Pilot
Download LINK BELT KPS2E20D40A Spec Sheet
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

LINK BELT Bearing Details

  • 1.25 in
  • 11.8
  • 4525VQ
  • 1 15/16 in
  • Double
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
  • 4525VQ60A21-11DD20
  • 3000
  • 2500
  • 31.5
  • 90
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 4.1
1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings pdf

LINK BELT KPS2E20D40A 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings Customers who bought this item also bought

Cross reference 1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings

No.BrandBdDNounSealsWeightUNSPSCInventory
KPS2E20D40ALINK BELT1.688 Inch | 42.875 Millimeter1.25 Inch | 31.75 Millimeter1.344 Inch | 34.13 MillimeterBearingSingle Lip Contact0.454311715110.0

 

LINK BELT KFXS212D Flange Block BearingsPort Type:101.0 LB; Pressure Port Size, Shaft End:Flange Mount; Controlled Flow Rate:Right Hand (CW); Shaft End Pressure [Max:4525VQ60A21-11DD20; Shaft Dia.:3.5; Integral Valve Configuration:Flange; Pilot Type:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Manufacturer Part No.:1.25 in; Pump Series:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
LINK BELT FC3U2M65N Flange Block BearingsPilot Type:101.0 LB; Shaft Type:Flange Mount; Mounting Flange:Right Hand (CW); GPM @ 1,800 rpm, Cover End:4525VQ60A21-11DD20; Shaft End Flow @ RPM:3.5; Model No.:Flange; Shaft Dia.:N/A; Minor Diameter:Standard Pilot; Shaft End RPM [Max:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
LINK BELT FEB22431E Flange Block BearingsMinor Diameter [Max:101.0 LB; Pressure Port Size, Shaft End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft End Pressure [Max:4525VQ60A21-11DD20; Mounting:3.5; Major Diameter [Min:Flange; Shaft Dia.:N/A; Seal Material:Standard Pilot; Port Orientation - Shaft End:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
LINK BELT DSB22439H24 Take Up Unit BearingsDisplacement Shaft End (cu in/revolution):101.0 LB; Minor Diameter [Max:Flange Mount; Pilot Type:Right Hand (CW); Weight:4525VQ60A21-11DD20; Port Orientation - Shaft End:3.5; Pressure Port Size, Shaft End:Flange; Pressure Port Size, Cover End:N/A; Major Diameter [Max:Standard Pilot; Shaft Type:1.25 in; Seal Material:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block BearingsPressure Port Size, Shaft End:101.0 LB; Model No.:Flange Mount; Seal Material:Right Hand (CW); Weight:4525VQ60A21-11DD20; Rotation:3.5; Shaft Dia.:Flange; Shaft Key:N/A; Shaft End Pressure [Max:Standard Pilot; Major Diameter [Min:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller BearingsPilot Type:101.0 LB; Integral Valve Configuration:Flange Mount; Pump Series:Right Hand (CW); Major Diameter [Max:4525VQ60A21-11DD20; Mounting Flange:3.5; Major Diameter [Min:Flange; Shaft Seal Type:N/A; Port Orientation - Shaft End:Standard Pilot; Cover End RPM [Max:1.25 in; Weight:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
LINK BELT FC3Y219N Flange Block BearingsShaft End RPM [Max:101.0 LB; Cover End Pressure [Max:Flange Mount; Max. RPM [Max:Right Hand (CW); Major Diameter [Max:4525VQ60A21-11DD20; Relief Valve Setting:3.5; Shaft End Flow @ RPM:Flange; Minor Diameter [Max:N/A; Shaft Key:Standard Pilot; Cover End RPM [Max:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter LINK BELT MU5213TV Cylindrical Roller BearingsRelief Valve Setting:101.0 LB; Model No.:Flange Mount; Rotation:Right Hand (CW); Max. RPM [Max:4525VQ60A21-11DD20; Cover End RPM [Max:3.5; Shaft Seal Type:Flange; Minor Diameter [Max:N/A; Integral Valve Configuration:Standard Pilot; Mounting Flange:1.25 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
LINK BELT CEU323 Cartridge Unit BearingsRotation:101.0 LB; Seal Material:Flange Mount; Shaft Key:Right Hand (CW); Model No.:4525VQ60A21-11DD20; GPM @ 1,800 rpm, Shaft End:3.5; Displacement Shaft End (cu in/revolution):Flange; Port Orientation - Shaft End:N/A; Cover End Pressure [Max:Standard Pilot; Major Diameter [Max:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
0.984 Inch | 25 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.437 Inch | 36.5 Millimeter LINK BELT KLPSS2M25 Pillow Block BearingsControlled Flow Rate:101.0 LB; Cover End RPM [Max:Flange Mount; Shaft Key:Right Hand (CW); Shaft Type:4525VQ60A21-11DD20; Port Type:3.5; Cover End Flow @ RPM:Flange; Displacement Cover End (cu in/revolution):N/A; Cover End Pressure [Max:Standard Pilot; Port Size:1.25 in; Spline Description:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;

 

B440L Link-Belt Bearing Inserts (Unmounted Replacements

B440L Link-Belt B22400 Series Spherical Roller Bearing 10425347 B440L 2 1/2 INSERT ROLLER BRG 793699983784

Bearings: Ball, Cylindrical, Filament, Sleeve, and Roller

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

P3U235N Link-Belt Pillow Blocks Ball Bearings - Rexnord

P3U235N Link-Belt 200 Series Standard Duty Pillow Block Ball Bearing 10413991 P3U235N 2 3/16 PILLOWBLK BALL BRG 662327121297

Link-Belt & Rex Bearing Catalog

2 Link-Belt® Spherical Roller Bearing Units. 123. Features & Benefits ... Rex® Roller Bearings represent the continuation of 80 years of bearing technology and 

Link-Belt Spherical Roller Bearings - Bearings | Rexnord

Link-Belt bearings are the workhorse of the bearing industry. Link-Belt's rugged spherical roller bearings perform with outstanding misalignment capabilities, 

 

1.25 Inch | 31.75 Millimeter x 1.344 Inch | 34.13 Millimeter x 1.688 Inch | 42.875 Millimeter LINK BELT KPS2E20D40A Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

LINK BELT KPS2E20D40A Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

LINK BELT Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed LINK BELT KPS2E20D40A Also Viewed

  • 2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block Bearings
  • LINK BELT DSB22439H24 Take Up Unit Bearings
  • LINK BELT KFXS212D Flange Block Bearings
  • LINK BELT FC3U2M65N Flange Block Bearings
  • 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2022 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us