• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>LINK BELT Bearing>2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings

  • 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings
  • 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings
  • 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings
  • 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings
  • 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings
  • 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings

LINK BELT P2U339 MODELS

Need a CAD or 3D Model?

What is P2U339 bearing interchange？
Contact NowWhatsAppBe Our Agent

2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings

category

LINK BELT Bearing

LINK BELT P2U339 SPECIFICATIONS

  • With over 10170 full-service stores, our 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings inventory is extensive and our parts are priced right. within 24 hours. This 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter helps you Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. maximize your productivity by saving time and your hard-earned dollars.

  • LINK BELT

  • P2U339

  • 76.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 3525V35A17-11AA22L
  • 3
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

LINK BELT Bearing Details

  • 1.375 in
  • 14 Tooth Splined
  • 3525V
  • 2.3125 in
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
  • 3525V35A17-11AA22L
  • 2500
  • 2500
  • 25.5
  • 52.5
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Code 61
  • 1 1/4 in Code 61
  • 3.4
  • 6.8

LINK BELT P2U339 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings Customers who bought this item also bought

Cross reference 2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings

No.BrandrRdDTBCCu
5339Ruville - - - - - - - -
WJ-333916KOYO - - 52.38861.913 - - 57.8 kN16.2
CX339Loyal - - - - - - - -
NP353549/NP673396Timken2 mm2 mm35 mm72 mm24,25 mm23,5 mm19 mm -
NP233968/NP366890Timken - 3,5 mm133,35 mm196,85 mm46,038 mm46,038 mm38,1 mm -
PW42840339CSPFI - - 42 mm84,03 mm - 39 mm39 mm -
F-213390INA - - 22 mm32 mm - - 13 mm -
PHU2339PFI - - 30 mm138 mm - 72 mm - -
533953FAG - - 42 mm75 mm - 37 mm - -
633966BBSKF - - 40 mm75 mm - 37 mm37 mm -
PCJ333916NTN - - 52.38861.913 - - 55 kN -

 

LINK BELT FC3Y219N Flange Block BearingsMounting:76.0 LB; Rotation:Flange Mount; Major Diameter [Max:Left Hand (CCW); Controlled Flow Rate:3525V35A17-11AA22L; Integral Valve Configuration:3; Manufacturer Part No.:Flange; Shaft End Flow @ RPM:N/A; Pressure Port Size, Cover End:Standard Pilot; Shaft Dia.:1.375 in; Pilot Type:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
LINK BELT FC3U2M65N Flange Block BearingsDisplacement Shaft End (cu in/revolution):76.0 LB; Shaft Seal Type:Flange Mount; Relief Valve Setting:Left Hand (CCW); Minor Diameter [Max:3525V35A17-11AA22L; Minor Diameter [Min:3; Minor Diameter:Flange; Displacement Cover End (cu in/revolution):N/A; Integral Valve Configuration:Standard Pilot; Manufacturer Part No.:1.375 in; Port Orientation - Shaft End:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
LINK BELT KFXS212D Flange Block BearingsPump Series:76.0 LB; Minor Diameter [Min:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Weight:3525V35A17-11AA22L; Shaft Dia.:3; Shaft Key:Flange; Shaft Type:N/A; Shaft End Flow @ RPM:Standard Pilot; Shaft End RPM [Max:1.375 in; Mounting Flange:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
LINK BELT CEU323 Cartridge Unit BearingsCover End Pressure [Max:76.0 LB; Port Type:Flange Mount; Shaft Key:Left Hand (CCW); Controlled Flow Rate:3525V35A17-11AA22L; Shaft Type:3; Rotation:Flange; Shaft Dia.:N/A; Integral Valve Configuration:Standard Pilot; Model No.:1.375 in; Minor Diameter:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block BearingsRotation:76.0 LB; Shaft Seal Type:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft End Pressure [Max:3525V35A17-11AA22L; GPM @ 1,800 rpm, Shaft End:3; Spline Description:Flange; Mounting:N/A; Pressure Port Size, Cover End:Standard Pilot; Integral Valve Configuration:1.375 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller BearingsSpline Description:76.0 LB; Integral Valve Configuration:Flange Mount; Major Diameter [Min:Left Hand (CCW); Minor Diameter:3525V35A17-11AA22L; Shaft Seal Type:3; Relief Valve Setting:Flange; Cover End Flow @ RPM:N/A; Mounting:Standard Pilot; Cover End Pressure [Max:1.375 in; Weight:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
LINK BELT DSB22439H24 Take Up Unit BearingsShaft Type:76.0 LB; Pilot Type:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Pressure Port Size, Cover End:3525V35A17-11AA22L; Seal Material:3; Minor Diameter:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Major Diameter [Max:Standard Pilot; Pressure Port Size, Shaft End:1.375 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
0.984 Inch | 25 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.437 Inch | 36.5 Millimeter LINK BELT KLPSS2M25 Pillow Block BearingsGPM @ 1,800 rpm, Cover End:76.0 LB; Shaft Length:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Pilot Type:3525V35A17-11AA22L; Displacement Cover End (cu in/revolution):3; Shaft Seal Type:Flange; Port Orientation - Shaft End:N/A; Major Diameter [Max:Standard Pilot; Pump Series:1.375 in; Rotation:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
LINK BELT FEB22431E Flange Block BearingsModel No.:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Pilot Type:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:3525V35A17-11AA22L; Pump Series:3; Mounting Flange:Flange; Major Diameter [Max:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.375 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter LINK BELT MU5213TV Cylindrical Roller BearingsPort Size:76.0 LB; Cover End Pressure [Max:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Controlled Flow Rate:3525V35A17-11AA22L; Manufacturer Part No.:3; Minor Diameter [Min:Flange; Pressure Port Size, Shaft End:N/A; Pressure Port Size, Cover End:Standard Pilot; Spline Description:1.375 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V35A17-11AA22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):6.8;

 

B440L Link-Belt Bearing Inserts (Unmounted Replacements

B440L Link-Belt B22400 Series Spherical Roller Bearing 10425347 B440L 2 1/2 INSERT ROLLER BRG 793699983784

P3U235N Link-Belt Pillow Blocks Ball Bearings - Rexnord

P3U235N Link-Belt 200 Series Standard Duty Pillow Block Ball Bearing 10413991 P3U235N 2 3/16 PILLOWBLK BALL BRG 662327121297

Link-Belt & Rex Bearing Catalog

2 Link-Belt® Spherical Roller Bearing Units. 123. Features & Benefits ... Rex® Roller Bearings represent the continuation of 80 years of bearing technology and 

Link-Belt Spherical Roller Bearings - Bearings | Rexnord

Link-Belt bearings are the workhorse of the bearing industry. Link-Belt's rugged spherical roller bearings perform with outstanding misalignment capabilities, 

Bearings: Ball, Cylindrical, Filament, Sleeve, and Roller

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

 

2.438 Inch | 61.925 Millimeter x 3.313 Inch | 84.14 Millimeter x 4.125 Inch | 104.775 Millimeter LINK BELT P2U339 Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

LINK BELT P2U339 Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

LINK BELT Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed LINK BELT P2U339 Also Viewed

  • 2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block Bearings
  • LINK BELT DSB22439H24 Take Up Unit Bearings
  • LINK BELT KFXS212D Flange Block Bearings
  • LINK BELT FC3U2M65N Flange Block Bearings
  • 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2026 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us