• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>LINK BELT Bearing>7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings

  • 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings
  • 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings
  • 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings
  • 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings
  • 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings
  • 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings

LINK BELT PELB68120FR MODELS

Need a CAD or 3D Model?

What is PELB68120FR bearing cross reference？
Contact NowWhatsAppBe Our Agent

7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings

category

LINK BELT Bearing

LINK BELT PELB68120FR SPECIFICATIONS

  • What 340mm D is the best place to buy 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter online? LINK BELT Bearing Manufacturing Service Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. .

  • LINK BELT

  • PELB68120FR

  • 76.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 3525VQ25A21-11DD20
  • 3
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

LINK BELT Bearing Details

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1 15/16 in
  • Buna-N
  • 2500
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2500
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3525VQ25A21-11DD20
  • 3000
  • 3000
  • 31.5
  • 37.5
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 4.12
  • 4.98

LINK BELT PELB68120FR 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings Customers who bought this item also bought

Cross reference 7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings

No.BrandBdDNounSealsWeightUNSPSCInventory
PELB68120FRCLINK BELT9.5 Inch | 241.3 Millimeter7.5 Inch | 190.5 Millimeter0 Inch | 0 MillimeterBearingMulti Labyrinth281.227311715110.0
PLB68120FR02LINK BELT - - - - - 204.116 - 0.0
PELB68120FRLINK BELT9.5 Inch | 241.3 Millimeter7.5 Inch | 190.5 Millimeter0 Inch | 0 MillimeterBearingMulti Labyrinth280.32311715110.0
PLB68120FRLINK BELT9.5 Inch | 241.3 Millimeter7.5 Inch | 190.5 Millimeter0 Inch | 0 MillimeterBearingMulti Labyrinth273.97311715110.0
PLB68120FD802LINK BELT - - - - - 207.518 - 0.0
PLB68120FD5LINK BELT9.5 Inch | 241.3 Millimeter7.5 Inch | 190.5 Millimeter0 Inch | 0 MillimeterBearingPentac 5 Point273.97311715110.0
LB68120D83HLINK BELT - - - - - 0.794 - 0.0
L68120D8LINK BELT - - - - - 9.698 - 0.0
LB681203RLink-Belt (Rexnord) - - - - - - - -

 

2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter LINK BELT MU5213TV Cylindrical Roller BearingsGPM @ 1,800 rpm, Cover End:76.0 LB; Shaft Key:Flange Mount; Shaft Type:Right Hand (CW); Weight:3525VQ25A21-11DD20; Shaft Dia.:3; Pressure Port Size, Shaft End:Flange; Shaft Length:N/A; Cover End RPM [Max:Standard Pilot; Pump Series:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
LINK BELT FC3U2M65N Flange Block BearingsMinor Diameter [Max:76.0 LB; Mounting:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft Length:3525VQ25A21-11DD20; GPM @ 1,800 rpm, Cover End:3; Pilot Type:Flange; Mounting Flange:N/A; Shaft Type:Standard Pilot; Shaft Seal Type:1.25 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block BearingsShaft Key:76.0 LB; Max. RPM [Max:Flange Mount; Minor Diameter [Max:Right Hand (CW); Shaft Length:3525VQ25A21-11DD20; Seal Material:3; Shaft Dia.:Flange; GPM @ 1,800 rpm, Cover End:N/A; Rotation:Standard Pilot; Shaft Seal Type:1.25 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
LINK BELT FEB22431E Flange Block BearingsMinor Diameter:76.0 LB; Rotation:Flange Mount; Weight:Right Hand (CW); Major Diameter [Min:3525VQ25A21-11DD20; Spline Description:3; Controlled Flow Rate:Flange; Shaft End RPM [Max:N/A; Integral Valve Configuration:Standard Pilot; Mounting:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
LINK BELT FC3Y219N Flange Block BearingsMinor Diameter [Max:76.0 LB; Port Orientation - Shaft End:Flange Mount; Model No.:Right Hand (CW); Rotation:3525VQ25A21-11DD20; Manufacturer Part No.:3; Port Orientation - Cover End:Flange; Integral Valve Configuration:N/A; Seal Material:Standard Pilot; Shaft End RPM [Max:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
LINK BELT KFXS212D Flange Block BearingsMajor Diameter [Max:76.0 LB; Mounting Flange:Flange Mount; Max. RPM [Max:Right Hand (CW); Relief Valve Setting:3525VQ25A21-11DD20; Shaft End RPM [Max:3; Shaft Length:Flange; Controlled Flow Rate:N/A; Shaft End Flow @ RPM:Standard Pilot; Pilot Type:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
0.984 Inch | 25 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.437 Inch | 36.5 Millimeter LINK BELT KLPSS2M25 Pillow Block BearingsMinor Diameter:76.0 LB; Manufacturer Part No.:Flange Mount; Shaft Length:Right Hand (CW); Shaft Key:3525VQ25A21-11DD20; Spline Description:3; Shaft Dia.:Flange; Shaft End RPM [Max:N/A; Port Size:Standard Pilot; Major Diameter [Min:1.25 in; Shaft Seal Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
LINK BELT CEU323 Cartridge Unit BearingsShaft Key:76.0 LB; Pilot Type:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Cover End RPM [Max:3525VQ25A21-11DD20; Port Type:3; Cover End Flow @ RPM:Flange; Port Orientation - Cover End:N/A; Weight:Standard Pilot; Minor Diameter:1.25 in; Port Size:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
LINK BELT DSB22439H24 Take Up Unit BearingsRelief Valve Setting:76.0 LB; Minor Diameter:Flange Mount; Seal Material:Right Hand (CW); Mounting:3525VQ25A21-11DD20; Mounting Flange:3; Controlled Flow Rate:Flange; Shaft End Flow @ RPM:N/A; Cover End Pressure [Max:Standard Pilot; Pilot Type:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller BearingsCover End Flow @ RPM:76.0 LB; Port Size:Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:3525VQ25A21-11DD20; Port Type:3; Cover End Pressure [Max:Flange; Shaft Key:N/A; Model No.:Standard Pilot; Shaft Seal Type:1.25 in; Rotation:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;

 

B440L Link-Belt Bearing Inserts (Unmounted Replacements

B440L Link-Belt B22400 Series Spherical Roller Bearing 10425347 B440L 2 1/2 INSERT ROLLER BRG 793699983784

P3U235N Link-Belt Pillow Blocks Ball Bearings - Rexnord

P3U235N Link-Belt 200 Series Standard Duty Pillow Block Ball Bearing 10413991 P3U235N 2 3/16 PILLOWBLK BALL BRG 662327121297

Link-Belt Spherical Roller Bearings - Bearings | Rexnord

Link-Belt bearings are the workhorse of the bearing industry. Link-Belt's rugged spherical roller bearings perform with outstanding misalignment capabilities, 

Bearings: Ball, Cylindrical, Filament, Sleeve, and Roller

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

Link-Belt & Rex Bearing Catalog

2 Link-Belt® Spherical Roller Bearing Units. 123. Features & Benefits ... Rex® Roller Bearings represent the continuation of 80 years of bearing technology and 

 

7.5 Inch | 190.5 Millimeter x 0 Inch | 0 Millimeter x 9.5 Inch | 241.3 Millimeter LINK BELT PELB68120FR Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

LINK BELT PELB68120FR Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

LINK BELT Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed LINK BELT PELB68120FR Also Viewed

  • 2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block Bearings
  • LINK BELT DSB22439H24 Take Up Unit Bearings
  • LINK BELT KFXS212D Flange Block Bearings
  • LINK BELT FC3U2M65N Flange Block Bearings
  • 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2026 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us