• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>Timken Bearing>3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings

  • 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings
  • 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings
  • 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings
  • 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings
  • 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings
  • 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings

TIMKEN 740-2 MODELS

Need a CAD or 3D Model?

What is 740-2 bearing interchange？
Contact NowWhatsAppBe Our Agent

3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings

category

Timken Bearing

TIMKEN 740-2 SPECIFICATIONS

  • Request 013992054234 Bearing UPC A Quote For 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter Your Special 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings Needs Today! Free Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. Timken Bearing Quotes. ISO 9001 certified.

  • TIMKEN

  • 740-2

  • 45.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 2520VQ12A5-11BC20LH
  • 2 1/2
  • Flange
  • N/A
  • Standard Pilot
Download TIMKEN 740-2 Spec Sheet
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings Product Identifiers

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2700
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2700
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 2520VQ12A5-11BC20LH
  • 3000
  • 3000
  • 7.5
  • 18
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 1.1
  • 2.45
3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings pdf

TIMKEN 740-2 TIMKEN Compare similar products

Cross reference 3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings

No.BrandWCdmsTDB
Z-537401.01FAG - - 45 mm - - - 75 mm19 mm
Z-574099.ZL-K-C5FAG - - 530 mm678 kg / Weight22 mm / Axial displacement facility from central position - 870 mm272 mm
VKBA 740SKF - - - - - - - -
RW387401AKBC53.975 mm - 18.961 mm - - - 38.1 mm -
VKBA 3740SKF - - - - - - - -
RAX 740KOYO - 22,2 mm40 - - - 48 mm -
RAXF 740KOYO - 22,2 mm40 - - - 48 mm -
234740ISO - - 207 mm - - 132 mm310 mm -
234740 MSPLoyal - 265 kN207 mm - - 132 mm310 mm -
234740-M-SPFAG - 66 mm207 mm28,6 kg / Weight - - 310 mm132 mm
234740BKOYO16 mm279 kN207 mm - - 132 mm310 mm33 mm

 

TIMKEN 14139-50000/14274-50000 Tapered Roller Bearing AssembliesCover End RPM [Max:45.0 LB; Minor Diameter [Min:Flange Mount; Spline Description:Left Hand (CCW); Pressure Port Size, Shaft End:2520VQ12A5-11BC20LH; Max. RPM [Max:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Integral Valve Configuration:N/A; Seal Material:Standard Pilot; Rotation:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
8.661 Inch | 220 Millimeter x 15.748 Inch | 400 Millimeter x 5.669 Inch | 144 Millimeter TIMKEN 23244YMBW33W45A Spherical Roller BearingsShaft End Pressure [Max:45.0 LB; Mounting Flange:Flange Mount; Shaft Key:Left Hand (CCW); Shaft End RPM [Max:2520VQ12A5-11BC20LH; Pressure Port Size, Shaft End:2 1/2; Cover End Pressure [Max:Flange; Relief Valve Setting:N/A; Rotation:Standard Pilot; Port Orientation - Cover End:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 0.906 Inch | 23 Millimeter TIMKEN 2MM213WI Precision Ball BearingsManufacturer Part No.:45.0 LB; Shaft Type:Flange Mount; Minor Diameter [Max:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:2520VQ12A5-11BC20LH; Relief Valve Setting:2 1/2; Seal Material:Flange; Port Size:N/A; Shaft End Flow @ RPM:Standard Pilot; Shaft End RPM [Max:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter TIMKEN 22310CJW33C4 Spherical Roller BearingsShaft End Flow @ RPM:45.0 LB; Pilot Type:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Major Diameter [Min:2520VQ12A5-11BC20LH; Major Diameter [Max:2 1/2; Pressure Port Size, Cover End:Flange; Cover End Flow @ RPM:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft End RPM [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
6.693 Inch | 170 Millimeter x 12.205 Inch | 310 Millimeter x 4.125 Inch | 104.775 Millimeter TIMKEN A-5234-WM R6 Cylindrical Roller BearingsGPM @ 1,800 rpm, Cover End:45.0 LB; Controlled Flow Rate:Flange Mount; Mounting Flange:Left Hand (CCW); Cover End RPM [Max:2520VQ12A5-11BC20LH; Pressure Port Size, Shaft End:2 1/2; Shaft Dia.:Flange; Major Diameter [Min:N/A; Port Orientation - Shaft End:Standard Pilot; Mounting:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
2.558 Inch | 64.973 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 656-2 Tapered Roller BearingsSpline Description:45.0 LB; Port Size:Flange Mount; Shaft Seal Type:Left Hand (CCW); Controlled Flow Rate:2520VQ12A5-11BC20LH; Major Diameter [Max:2 1/2; Max. RPM [Max:Flange; Port Type:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Mounting:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
0 Inch | 0 Millimeter x 16.5 Inch | 419.1 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN 435165-3 Tapered Roller BearingsGPM @ 1,800 rpm, Cover End:45.0 LB; Pilot Type:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Displacement Cover End (cu in/revolution):2520VQ12A5-11BC20LH; Shaft Type:2 1/2; Weight:Flange; Port Size:N/A; Cover End Pressure [Max:Standard Pilot; Max. RPM [Max:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
2.362 Inch | 60 Millimeter x 3.346 Inch | 85 Millimeter x 1.024 Inch | 26 Millimeter TIMKEN 2MM9312WIDULFS637 Precision Ball BearingsIntegral Valve Configuration:45.0 LB; Pilot Type:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Shaft Key:2520VQ12A5-11BC20LH; Shaft Dia.:2 1/2; Shaft End Flow @ RPM:Flange; Spline Description:N/A; Minor Diameter:Standard Pilot; Port Orientation - Shaft End:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 0.787 Inch | 20 Millimeter TIMKEN 2MMVC9114HX SUL Precision Ball BearingsPort Type:45.0 LB; Minor Diameter [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft Type:2520VQ12A5-11BC20LH; Relief Valve Setting:2 1/2; Manufacturer Part No.:Flange; GPM @ 1,800 rpm, Cover End:N/A; Shaft Length:Standard Pilot; Major Diameter [Max:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;
TIMKEN LSE404BX Insert Bearings Cylindrical ODModel No.:45.0 LB; Port Size:Flange Mount; Minor Diameter:Left Hand (CCW); Shaft Type:2520VQ12A5-11BC20LH; Shaft Key:2 1/2; Cover End RPM [Max:Flange; Cover End Flow @ RPM:N/A; Pilot Type:Standard Pilot; Shaft End Flow @ RPM:0.875 in; Weight:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A5-11BC20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.45;

 

Precision Bearings | The Timken Company

Our extensive range of Timken® precision bearing assemblies, designed for the 

Tapered Roller Bearings | The Timken Company

Inch Single Row. Single-row tapered roller bearings are the most basic and 

The Timken Company | Engineered Bearings & Mechanical

The Timken Company designs a growing portfolio of engineered bearings and power transmission products. With more than a century of knowledge and 

Timken Engineered Bearings | The Timken Company

Our tapered, spherical, cylindrical, thrust, ball, plain, miniature, precision and 

Bearing Search | The Timken Company

New Search Search for a bearing and then navigate to Tolerances, Periodic 

 

3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.838 Inch | 46.685 Millimeter TIMKEN 740-2 Tapered Roller Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

TIMKEN 740-2 Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

Timken Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed TIMKEN 740-2 Also Viewed

  • TIMKEN 14139-50000/14274-50000 Tapered Roller Bearing Assemblies
  • 8.661 Inch | 220 Millimeter x 15.748 Inch | 400 Millimeter x 5.669 Inch | 144 Millimeter TIMKEN 23244YMBW33W45A Spherical Roller Bearings
  • TIMKEN LSE404BX Insert Bearings Cylindrical OD
  • 2.558 Inch | 64.973 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 656-2 Tapered Roller Bearings
  • 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 0.906 Inch | 23 Millimeter TIMKEN 2MM213WI Precision Ball Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us