• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>Timken Bearing>1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings

  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter  TIMKEN HM903249A-2  Tapered Roller Bearings
  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter  TIMKEN HM903249A-2  Tapered Roller Bearings
  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter  TIMKEN HM903249A-2  Tapered Roller Bearings
  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter  TIMKEN HM903249A-2  Tapered Roller Bearings
  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter  TIMKEN HM903249A-2  Tapered Roller Bearings
  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter  TIMKEN HM903249A-2  Tapered Roller Bearings

TIMKEN HM903249A-2 MODELS

Need a CAD or 3D Model?

What is HM903249A-2 bearing interchange?
Contact NowWhatsAppBe Our Agent

1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings

category

Timken Bearing

TIMKEN HM903249A-2 SPECIFICATIONS

  • 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings Needs Analysis 0.5 Kg Bearing Weight , 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter 3180 lbf C90 - Dynamic Radial Rating (90 million revolutions)4 Timken Bearing Manufacturing Service . Get Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. Your Free.

  • TIMKEN
  • HM903249A-2

  • 45.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 2520VQ17A11-11AA20-LH
  • 2 1/2
  • Flange
  • N/A
  • Standard Pilot
Download TIMKEN HM903249A-2 Spec Sheet
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings Product Identifiers

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520VQ17A11-11AA20-LH
  • 3000
  • 3000
  • 16.5
  • 25.5
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.22
  • 3.37
1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings pdf

TIMKEN HM903249A-2 TIMKEN Compare similar products

Cross reference 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings

No.BranddRarDCBT
HM903249A/HM903216Timken44,45 mm3,5 mm - 0,8 mm98,425 mm22,225 mm28,3 mm30,958 mm
HM903249/10PFI44,45 mm - - - 95,25 mm - - -
HM903249/HM903210NACHI44.450 mm - 0.1 mm - 95.250 mm99700 kN28.575 mm30.958 mm
HM903249/HM903216Timken44,45 mm3,5 mm - 0,8 mm98,425 mm22,225 mm28,575 mm30,958 mm
HM903249A/10ISO44,45 mm - 0,5 mm - 95,25 mm22,225 mm28,3 mm30,958 mm
HM903249A/HM903210Timken44,45 mm3,6 mm0,5 mm0,8 mm95,25 mm22,225 mm28,3 mm30,958 mm
HM 903249/2/210/2/QSKF44.45 mm - 30 mm - 95.25 mm22.225 mm28.575 mm30.958 mm
HM 903249/W/210/QCL7CSKF44.45 mm - 30 mm - 95.25 mm22.225 mm28.575 mm30.958 mm
HM903249-903A2TIMKEN1.75 Inch | 44.45 Millimeter - - - 3.75 Inch | 95.25 Millimeter - - -
HM903249A-2TIMKEN1.75 Inch | 44.45 Millimeter - - - 0 Inch | 0 Millimeter - 1.114 Inch | 28.296 Millimeter -
HM903249-3TIMKEN1.75 Inch | 44.45 Millimeter - - - 0 Inch | 0 Millimeter - 1.125 Inch | 28.575 Millimeter -

 

8.661 Inch | 220 Millimeter x 15.748 Inch | 400 Millimeter x 5.669 Inch | 144 Millimeter TIMKEN 23244YMBW33W45A Spherical Roller BearingsShaft Length:45.0 LB; Max. RPM [Max:Flange Mount; Rotation:Left Hand (CCW); Cover End RPM [Max:2520VQ17A11-11AA20-LH; Minor Diameter:2 1/2; Port Orientation - Shaft End:Flange; Shaft Key:N/A; Manufacturer Part No.:Standard Pilot; Weight:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
TIMKEN LSE404BX Insert Bearings Cylindrical ODRelief Valve Setting:45.0 LB; Cover End Pressure [Max:Flange Mount; Cover End RPM [Max:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:2520VQ17A11-11AA20-LH; Controlled Flow Rate:2 1/2; Shaft Type:Flange; Integral Valve Configuration:N/A; Pressure Port Size, Cover End:Standard Pilot; Major Diameter [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
6.693 Inch | 170 Millimeter x 12.205 Inch | 310 Millimeter x 4.125 Inch | 104.775 Millimeter TIMKEN A-5234-WM R6 Cylindrical Roller BearingsPort Orientation - Shaft End:45.0 LB; Cover End Pressure [Max:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Minor Diameter [Min:2520VQ17A11-11AA20-LH; Relief Valve Setting:2 1/2; Shaft Key:Flange; Rotation:N/A; Cover End RPM [Max:Standard Pilot; Major Diameter [Max:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
2.558 Inch | 64.973 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 656-2 Tapered Roller BearingsPort Type:45.0 LB; Rotation:Flange Mount; Shaft Length:Left Hand (CCW); Port Orientation - Cover End:2520VQ17A11-11AA20-LH; Minor Diameter [Max:2 1/2; Shaft End RPM [Max:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Max. RPM [Max:Standard Pilot; Minor Diameter [Min:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
TIMKEN 14139-50000/14274-50000 Tapered Roller Bearing AssembliesControlled Flow Rate:45.0 LB; Minor Diameter [Min:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Shaft End Flow @ RPM:2520VQ17A11-11AA20-LH; Shaft Type:2 1/2; Cover End Pressure [Max:Flange; Shaft Length:N/A; Manufacturer Part No.:Standard Pilot; Shaft Seal Type:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
2.362 Inch | 60 Millimeter x 3.346 Inch | 85 Millimeter x 1.024 Inch | 26 Millimeter TIMKEN 2MM9312WIDULFS637 Precision Ball BearingsPort Orientation - Cover End:45.0 LB; Weight:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Seal Material:2520VQ17A11-11AA20-LH; Controlled Flow Rate:2 1/2; Port Orientation - Shaft End:Flange; Shaft Type:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
0 Inch | 0 Millimeter x 16.5 Inch | 419.1 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN 435165-3 Tapered Roller BearingsMounting:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Port Orientation - Cover End:2520VQ17A11-11AA20-LH; Shaft Length:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Pilot Type:N/A; Integral Valve Configuration:Standard Pilot; Relief Valve Setting:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 0.787 Inch | 20 Millimeter TIMKEN 2MMVC9114HX SUL Precision Ball BearingsDisplacement Shaft End (cu in/revolution):45.0 LB; Pump Series:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Integral Valve Configuration:2520VQ17A11-11AA20-LH; Max. RPM [Max:2 1/2; Spline Description:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Minor Diameter:Standard Pilot; Major Diameter [Min:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 0.906 Inch | 23 Millimeter TIMKEN 2MM213WI Precision Ball BearingsPort Size:45.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); Max. RPM [Max:2520VQ17A11-11AA20-LH; Shaft End Flow @ RPM:2 1/2; Spline Description:Flange; Rotation:N/A; Shaft Key:Standard Pilot; Weight:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter TIMKEN 22310CJW33C4 Spherical Roller BearingsWeight:45.0 LB; Shaft End Pressure [Max:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Minor Diameter:2520VQ17A11-11AA20-LH; Controlled Flow Rate:2 1/2; Spline Description:Flange; Cover End Flow @ RPM:N/A; Shaft Dia.:Standard Pilot; Pressure Port Size, Shaft End:0.875 in; Port Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;

 

Timken Engineered Bearings | The Timken Company

Our tapered, spherical, cylindrical, thrust, ball, plain, miniature, precision and 

Tapered Roller Bearings | The Timken Company

Inch Single Row. Single-row tapered roller bearings are the most basic and 

Precision Bearings | The Timken Company

Our extensive range of Timken® precision bearing assemblies, designed for the 

Bearing Search | The Timken Company

New Search Search for a bearing and then navigate to Tolerances, Periodic 

The Timken Company | Engineered Bearings & Mechanical

The Timken Company designs a growing portfolio of engineered bearings and power transmission products. With more than a century of knowledge and 

 

1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.114 Inch | 28.296 Millimeter TIMKEN HM903249A-2 Tapered Roller Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

TIMKEN HM903249A-2 Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

Timken Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed TIMKEN HM903249A-2 Also Viewed

  • TIMKEN 14139-50000/14274-50000 Tapered Roller Bearing Assemblies
  • 8.661 Inch | 220 Millimeter x 15.748 Inch | 400 Millimeter x 5.669 Inch | 144 Millimeter TIMKEN 23244YMBW33W45A Spherical Roller Bearings
  • TIMKEN LSE404BX Insert Bearings Cylindrical OD
  • 2.558 Inch | 64.973 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 656-2 Tapered Roller Bearings
  • 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 0.906 Inch | 23 Millimeter TIMKEN 2MM213WI Precision Ball Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us