• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>Timken Bearing>2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings

  • 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings
  • 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings

TIMKEN RAK2 MODELS

Need a CAD or 3D Model?

What is RAK2 bearing cross reference？
Contact NowWhatsAppBe Our Agent

2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings

category

Timken Bearing

TIMKEN RAK2 SPECIFICATIONS

  • We work closely with our 525.80 mm Da - Cup Frontface Backing Diameter 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings manufacturing partners to Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter bring the best value to customers.

  • TIMKEN

  • RAK2

  • 101.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 4525VQ50A17-11AA20-LH
  • 3 1/2
  • Flange
  • N/A
  • Standard Pilot
Download TIMKEN RAK2 Spec Sheet
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings Product Identifiers

  • 1.25 in
  • 14 Tooth Splined
  • 4525VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm
  • 4525VQ50A17-11AA20-LH
  • 3000
  • 2500
  • 25.5
  • 75
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 3.37
  • 9.9
2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings pdf

TIMKEN RAK2 TIMKEN Compare similar products

Cross reference 2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings

No.BranddDABHJNL
RAK2INA50,8 mm - 62,51 mm71,4 mm61,9 mm175,743 mm18,009 mm224,994 mm
RAK2-15/16INA74,613 mm - 70,003 mm67,006 mm84,1 mm210,998 mm24,003 mm273 mm
RAK2-3/16INA55,563 mm - 62,51 mm71,4 mm61,9 mm175,743 mm18,009 mm224,994 mm
RAK2-7/16INA61,913 mm - 64,999 mm77,902 mm68,301 mm189,256 mm18,009 mm245,009 mm
RAK2 3/8TIMKEN2.375 Inch | 60.325 Millimeter3.063 Inch | 77.8 Millimeter - 2.688 Inch | 68.275 Millimeter - - - -
RAK2 NTTIMKEN2 Inch | 50.8 Millimeter2.813 Inch | 71.45 Millimeter - 2.438 Inch | 61.925 Millimeter - - - -
RAK2 7/16 NTTIMKEN2.438 Inch | 61.925 Millimeter3.063 Inch | 77.8 Millimeter - 2.688 Inch | 68.275 Millimeter - - - -
RAK25TIMKEN - - - - - - - -
RAK2 1/4TIMKEN2.25 Inch | 57.15 Millimeter3.063 Inch | 77.8 Millimeter - 2.688 Inch | 68.275 Millimeter - - - -
RAK2 1/8TIMKEN2.125 Inch | 53.975 Millimeter2.813 Inch | 71.45 Millimeter - 2.438 Inch | 61.925 Millimeter - - - -
RAK2 11/16 NTTIMKEN2.688 Inch | 68.275 Millimeter3.375 Inch | 85.725 Millimeter - 3 Inch | 76.2 Millimeter - - - -

 

1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter TIMKEN 22310CJW33C4 Spherical Roller BearingsShaft Seal Type:101.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Spline Description:4525VQ50A17-11AA20-LH; Port Orientation - Cover End:3 1/2; Shaft Key:Flange; Pilot Type:N/A; Pressure Port Size, Shaft End:Standard Pilot; Minor Diameter [Min:1.25 in; Model No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
8.661 Inch | 220 Millimeter x 15.748 Inch | 400 Millimeter x 5.669 Inch | 144 Millimeter TIMKEN 23244YMBW33W45A Spherical Roller BearingsShaft End Flow @ RPM:101.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Pressure Port Size, Shaft End:4525VQ50A17-11AA20-LH; Pump Series:3 1/2; Shaft End Pressure [Max:Flange; Port Type:N/A; Rotation:Standard Pilot; Pilot Type:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
6.693 Inch | 170 Millimeter x 12.205 Inch | 310 Millimeter x 4.125 Inch | 104.775 Millimeter TIMKEN A-5234-WM R6 Cylindrical Roller BearingsShaft End Pressure [Max:101.0 LB; Rotation:Flange Mount; Relief Valve Setting:Left Hand (CCW); Port Type:4525VQ50A17-11AA20-LH; Weight:3 1/2; Shaft End RPM [Max:Flange; Controlled Flow Rate:N/A; Pilot Type:Standard Pilot; Manufacturer Part No.:1.25 in; Model No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
2.558 Inch | 64.973 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 656-2 Tapered Roller BearingsShaft End Flow @ RPM:101.0 LB; Major Diameter [Min:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Cover End Flow @ RPM:4525VQ50A17-11AA20-LH; Shaft Dia.:3 1/2; Max. RPM [Max:Flange; Port Type:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Shaft Length:1.25 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 0.906 Inch | 23 Millimeter TIMKEN 2MM213WI Precision Ball BearingsRelief Valve Setting:101.0 LB; Major Diameter [Max:Flange Mount; Mounting Flange:Left Hand (CCW); Spline Description:4525VQ50A17-11AA20-LH; Shaft Length:3 1/2; Pressure Port Size, Shaft End:Flange; Shaft Key:N/A; Mounting:Standard Pilot; Cover End Pressure [Max:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
2.362 Inch | 60 Millimeter x 3.346 Inch | 85 Millimeter x 1.024 Inch | 26 Millimeter TIMKEN 2MM9312WIDULFS637 Precision Ball BearingsShaft Type:101.0 LB; Seal Material:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Cover End RPM [Max:4525VQ50A17-11AA20-LH; Major Diameter [Max:3 1/2; Model No.:Flange; Cover End Pressure [Max:N/A; Pressure Port Size, Cover End:Standard Pilot; Shaft Seal Type:1.25 in; Port Size:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
0 Inch | 0 Millimeter x 16.5 Inch | 419.1 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN 435165-3 Tapered Roller BearingsMajor Diameter [Min:101.0 LB; Integral Valve Configuration:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Cover End Flow @ RPM:4525VQ50A17-11AA20-LH; Shaft Seal Type:3 1/2; Major Diameter [Max:Flange; Mounting Flange:N/A; Pressure Port Size, Cover End:Standard Pilot; Relief Valve Setting:1.25 in; Model No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 0.787 Inch | 20 Millimeter TIMKEN 2MMVC9114HX SUL Precision Ball BearingsMounting:101.0 LB; Port Orientation - Shaft End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Weight:4525VQ50A17-11AA20-LH; Pressure Port Size, Cover End:3 1/2; Shaft Key:Flange; GPM @ 1,800 rpm, Cover End:N/A; Seal Material:Standard Pilot; Relief Valve Setting:1.25 in; Port Size:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
TIMKEN 14139-50000/14274-50000 Tapered Roller Bearing AssembliesDisplacement Shaft End (cu in/revolution):101.0 LB; Shaft End Pressure [Max:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Cover End RPM [Max:4525VQ50A17-11AA20-LH; Spline Description:3 1/2; Relief Valve Setting:Flange; Mounting:N/A; Shaft Key:Standard Pilot; Port Orientation - Cover End:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;
TIMKEN LSE404BX Insert Bearings Cylindrical ODControlled Flow Rate:101.0 LB; Port Type:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Rotation:4525VQ50A17-11AA20-LH; Spline Description:3 1/2; Major Diameter [Min:Flange; Max. RPM [Max:N/A; Port Orientation - Cover End:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.25 in; Seal Material:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A17-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):9.9;

 

Timken Engineered Bearings | The Timken Company

Our tapered, spherical, cylindrical, thrust, ball, plain, miniature, precision and 

Bearing Search | The Timken Company

New Search Search for a bearing and then navigate to Tolerances, Periodic 

The Timken Company | Engineered Bearings & Mechanical

The Timken Company designs a growing portfolio of engineered bearings and power transmission products. With more than a century of knowledge and 

Precision Bearings | The Timken Company

Our extensive range of Timken® precision bearing assemblies, designed for the 

Tapered Roller Bearings | The Timken Company

Inch Single Row. Single-row tapered roller bearings are the most basic and 

 

2 Inch | 50.8 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.438 Inch | 61.925 Millimeter TIMKEN RAK2 Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

TIMKEN RAK2 Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

Timken Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed TIMKEN RAK2 Also Viewed

  • TIMKEN 14139-50000/14274-50000 Tapered Roller Bearing Assemblies
  • 8.661 Inch | 220 Millimeter x 15.748 Inch | 400 Millimeter x 5.669 Inch | 144 Millimeter TIMKEN 23244YMBW33W45A Spherical Roller Bearings
  • TIMKEN LSE404BX Insert Bearings Cylindrical OD
  • 2.558 Inch | 64.973 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 656-2 Tapered Roller Bearings
  • 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 0.906 Inch | 23 Millimeter TIMKEN 2MM213WI Precision Ball Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us