• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>SKF Bearing>3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter SKF 7016 ACD/P4ADBA Precision Ball Bearings

  • 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter  SKF 7016 ACD/P4ADBA  Precision Ball Bearings
  • 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter  SKF 7016 ACD/P4ADBA  Precision Ball Bearings
  • 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter  SKF 7016 ACD/P4ADBA  Precision Ball Bearings
  • 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter  SKF 7016 ACD/P4ADBA  Precision Ball Bearings
  • 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter  SKF 7016 ACD/P4ADBA  Precision Ball Bearings
  • 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter  SKF 7016 ACD/P4ADBA  Precision Ball Bearings

SKF 7016 ACD/P4ADBA MODELS

Need a CAD or 3D Model?

What is 7016 ACD/P4ADBA bearing cross reference?
Contact NowWhatsAppBe Our Agent

3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter SKF 7016 ACD/P4ADBA Precision Ball Bearings

category

SKF Bearing

SKF 7016 ACD/P4ADBA SPECIFICATIONS

  • SKF Bearing offers Powder Coated finish/coating: a 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter SKF 7016 ACD/P4ADBA Precision Ball Bearings selection of Genuine SKF Bearing at 9-5/16 to 11-5& D Wholesale 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter Prices. We Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. are a 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter SKF 7016 ACD/P4ADBA Precision Ball Bearings Certified Parts Retailer

  • SKF
  • 7016 ACD/P4ADBA

  • 45.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 2520VQ17A8-11DC20
  • 2 1/2
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

7016 ACD/P4ADBA Interchange guide

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520VQ17A8-11DC20
  • 3000
  • 3000
  • 12
  • 25.5
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 1.67
  • 3.37

SKF 7016 ACD/P4ADBA SKF Bearing Dimensions

Cross reference 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter SKF 7016 ACD/P4ADBA Precision Ball Bearings

No.BrandJDaHCBdH3
ZARF70160-L-TVINA133 mm160 mm - - 22,5 mm17,5 mm70 mm72 mm
ZARF70160-TVINA133 mm160 mm - 82 mm22,5 mm17,5 mm70 mm -
ZARF 70160 L TNNBS133 mm160 mm - - 22,5 mm17,5 mm70 mm72 mm
ZARF 70160 TNNBS133 mm160 mm - 82 mm22,5 mm17,5 mm70 mm -
7016Ruville - - - - - - - -
WC87016NTN - 35,000 mm - - 12,700 mm12,700 mm16,000 mm -
S7016 ACB/HCP4ASKF - 125 mm35.1 mm - - 22 mm80 mm -
S7016 ACB/P4ASKF - 125 mm35.1 mm - - 22 mm80 mm -
S7016 ACD/HCP4ASKF - 125 mm35 mm - - 22 mm80 mm -
S7016 ACD/P4ASKF - 125 mm35 mm - - 22 mm80 mm -
S7016 ACE/HCP4ASKF - 125 mm35.1 mm - - 22 mm80 mm -

 

SKF C2F104SSG Flange Block BearingsMax. RPM [Max:45.0 LB; Relief Valve Setting:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Weight:2520VQ17A8-11DC20; Mounting:2 1/2; Shaft End Pressure [Max:Flange; Port Orientation - Shaft End:N/A; Seal Material:Standard Pilot; Mounting Flange:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.992 Inch | 76 Millimeter SKF 7222 CD/P4ADGB Precision Ball BearingsCover End RPM [Max:45.0 LB; Shaft Seal Type:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Mounting Flange:2520VQ17A8-11DC20; Shaft Dia.:2 1/2; Rotation:Flange; Pilot Type:N/A; Shaft Length:Standard Pilot; Port Size:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
SKF 16015/C3 Single Row Ball BearingsSeal Material:45.0 LB; Cover End RPM [Max:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Max. RPM [Max:2520VQ17A8-11DC20; Mounting:2 1/2; Rotation:Flange; Shaft End Pressure [Max:N/A; Model No.:Standard Pilot; Pump Series:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
2.165 Inch | 55 Millimeter x 3.543 Inch | 90 Millimeter x 1.417 Inch | 36 Millimeter SKF 7011 CE/HCDGAVQ126 Angular Contact Ball BearingsPort Size:45.0 LB; Shaft End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Port Orientation - Cover End:2520VQ17A8-11DC20; Controlled Flow Rate:2 1/2; Cover End Pressure [Max:Flange; Weight:N/A; Major Diameter [Max:Standard Pilot; Shaft End RPM [Max:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
SKF 6217 2ZNRJEM Single Row Ball BearingsCover End RPM [Max:45.0 LB; Seal Material:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Port Size:2520VQ17A8-11DC20; Minor Diameter [Min:2 1/2; Integral Valve Configuration:Flange; Displacement Cover End (cu in/revolution):N/A; Mounting:Standard Pilot; Weight:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
12.598 Inch | 320 Millimeter x 18.898 Inch | 480 Millimeter x 6.299 Inch | 160 Millimeter SKF 24064 CC/C4W33 Spherical Roller BearingsShaft Key:45.0 LB; Shaft End Pressure [Max:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft Type:2520VQ17A8-11DC20; Major Diameter [Max:2 1/2; Model No.:Flange; Displacement Cover End (cu in/revolution):N/A; Cover End Pressure [Max:Standard Pilot; Seal Material:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
SKF C2F012SSG Flange Block BearingsPort Orientation - Cover End:45.0 LB; Minor Diameter:Flange Mount; Port Type:Right Hand (CW); Shaft Seal Type:2520VQ17A8-11DC20; GPM @ 1,800 rpm, Cover End:2 1/2; Mounting:Flange; Seal Material:N/A; Cover End Flow @ RPM:Standard Pilot; Mounting Flange:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
100 mm x 140 mm x 24 mm SKF NCF 2920 CV Cylindrical Roller BearingsModel No.:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft Dia.:Right Hand (CW); Minor Diameter [Min:2520VQ17A8-11DC20; Controlled Flow Rate:2 1/2; Minor Diameter [Max:Flange; Cover End Flow @ RPM:N/A; Shaft End Flow @ RPM:Standard Pilot; Pilot Type:0.875 in; Port Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
SKF 6211 2ZNRJEM Single Row Ball BearingsShaft Dia.:45.0 LB; Mounting Flange:Flange Mount; Minor Diameter [Min:Right Hand (CW); Manufacturer Part No.:2520VQ17A8-11DC20; Port Size:2 1/2; Shaft End Flow @ RPM:Flange; Cover End Pressure [Max:N/A; Cover End RPM [Max:Standard Pilot; Model No.:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
1.969 Inch | 50 Millimeter x 2.835 Inch | 72 Millimeter x 0.472 Inch | 12 Millimeter SKF 71910 CDGA/P4A Precision Ball BearingsModel No.:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Mounting Flange:Right Hand (CW); Port Orientation - Shaft End:2520VQ17A8-11DC20; Minor Diameter [Max:2 1/2; Mounting:Flange; Shaft End Pressure [Max:N/A; Seal Material:Standard Pilot; Max. RPM [Max:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;

 

Bearings, units and housings

SKF started with a bearing, and to this day is still a world leader in the design and manufacture of rolling and plain bearings. Here you will find our full assortment 

Bearings, units and housings

The application demands and operating conditions of rotating machinery are extremely diverse. To achieve the best performance fit for your application, there 

SKF Group - Bearings and units Lubrication solutions

NEWS. 2018 January 17, 08:00. Hans Stråberg proposed as new Chairman of the Board of AB SKF. Colleen Repplier proposed as new Board Member

Bearings, Seals, Lubrication, Mechatronics & Services | SKF

SKF is a leading bearing technology provider around rotating equipment since 1907 with experience in over 40 industries. Visit the SKF site to learn more about 

SKF Bearing Select - New

Please, use our new online bearing selection tool, SKF Bearing Select*. SKF Bearing Select will replace the SKF Bearing Calculator as well as the current 

 

3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.732 Inch | 44 Millimeter SKF 7016 ACD/P4ADBA Precision Ball Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SKF 7016 ACD/P4ADBA Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

SKF Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed SKF 7016 ACD/P4ADBA Also Viewed

  • SKF 6211 2ZNRJEM Single Row Ball Bearings
  • SKF 16015/C3 Single Row Ball Bearings
  • SKF 6217 2ZNRJEM Single Row Ball Bearings
  • 12.598 Inch | 320 Millimeter x 18.898 Inch | 480 Millimeter x 6.299 Inch | 160 Millimeter SKF 24064 CC/C4W33 Spherical Roller Bearings
  • 1.969 Inch | 50 Millimeter x 2.835 Inch | 72 Millimeter x 0.472 Inch | 12 Millimeter SKF 71910 CDGA/P4A Precision Ball Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us